Home / CATEGORY / Defence Aeronautics

Defence Aeronautics

According to Stratistics MRC, the Global Electronically Scanned Arrays is accounted for $6.68 billion in 2017 and is expected to reach $12.39 billion by 2026 growing at a CAGR of 7.1% during the forecast period. The growing preference for technologically advanced radar for providing all weather battlefield surveillance against incoming threat, integration of ESA into radar systems and replacement of traditional ESA systems are the key driving factors for the market growth. However, the long replacement cycle of the radar system and high development cost of ESA are some of the factors hindering the market growth. Electronically scanned array commonly means a phased array, i.e. an array of antennas that produce radio wave beams and rays. Electronically, the emitted waves are steered in the desired direction to a specific point without physically moving the antennas. Electronically scanned arrays must be installed properly and arranged precisely to get appropriate results during real time operations. In an array antenna, the transmitter transmits a radio frequency current, which is then fed to each antenna with the correct phase relationship so as to add radio waves to increase radiations in the exact location and direction, and cancel radiations in undesired directions. In the phased array system, current from the transmitter is transmitted to the antennas through electronic devices called phase shifters, which in turn are controlled by a computer system. This computer system can effectively alter the phase electronically and hence, steer the radio wave beams to the desired location. Based on type, the active electronically scanned arrays (AESA) is predicted to experience the highest growth in terms of revenue during the forecast period. AESAs are fitted with receivers and transmitters, which yet again consist of several small modules of transmitter/receivers. By geography, Asia Pacific region is anticipated to experience the highest growth in the coming eight years. The growing threats of terror activities in the region and is anticipated to drive the need for up gradation of surveillance capabilities. This in turn is predicted to accelerate the demand of electronically scanned arrays in Asia Pacific region. Some of the key players profiled in the Electronically Scanned Arrays include Almaz?Antey, Defence Research And Development Organization , Israel Aerospace Industries Ltd, Leonardo-Finmeccanica, Lockheed Martin Corporation, Northrop Grumman Corporation, RADA Electronic Industries Ltd, Raytheon Company, Reutech Radar Systems, SAAB AB, Thales Group and Toshiba. Platforms Covered: ? Airborne ? Land ? Naval Array Geometries Covered: ? Frequency Scanning Arrays ? Linear Arrays ? Planar Arrays Types Covered: ? Passive Electronically Scanned Array (PESA) ? Active Electronically Scanned Array (AESA) Components Covered: ? Beam forming Network (BFN) ? Cooling System ? Phase Shifters (Analog/Digital) ? Power Supply Module ? Radar Data Processor (RDP) ? Signal Processing (Analog/Digital) ? Transmit Receive Module (TRM) Ranges Covered: ? Long Range ? Medium Range ? Short Range Regions Covered: ? North America o US o Canada o Mexico ? Europe o Germany o UK o Italy o France o Spain o Rest of Europe ? Asia Pacific o Japan o China o India o Australia o New Zealand o South Korea o Rest of Asia Pacific ? South America o Argentina o Brazil o Chile o Rest of South America ? Middle East & Africa o Saudi Arabia o UAE o Qatar o South Africa o Rest of Middle East & Africa What our report offers: - Market share assessments for the regional and country level segments - Strategic recommendations for the new entrants - Market forecasts for a minimum of 9 years of all the mentioned segments, sub segments and the regional markets - Market Trends (Drivers, Constraints, Opportunities, Threats, Challenges, Investment Opportunities, and recommendations) - Strategic analysis: Drivers and Constraints, Product/Technology Analysis, Porter?s five forces analysis, SWOT analysis etc. - Strategic recommendations in key business segments based on the market estimations - Competitive landscaping mapping the key common trends - Company profiling with detailed strategies, financials, and recent developments - Supply chain trends mapping the latest technological advancements Free Customization Offerings: All the customers of this report will be entitled to receive one of the following free customization options: ? Company Profiling o Comprehensive profiling of additional market players (up to 3) o SWOT Analysis of key players (up to 3) ? Regional Segmentation o Market estimations, Forecasts and CAGR of any prominent country as per the clients interest (Note: Depends of feasibility check) ? Competitive Benchmarking Benchmarking of key players based on product portfolio, geographical presence, and strategic alliances ...

  • Id : RNR-760611
  • Category : Defence Aeronautics
  • Publisher : Stratistics MRC
  • Pages : 168

According to Stratistics MRC, the Global Military Simulation and Training Market is accounted for $ 10.74 billion in 2017 and is expected to reach $ 17.57 billion by 2026 growing at a CAGR of 5.6%. Factors such as rising demand for adoption of virtual training for future generation, and reducing the budget of military equipment and training are driving the market growth. However, lack of lack of inducements and challenges for manufacturers of simulators are hampering the growth of the market. Moreover, increase in the innovative technology and R&D activities about the military simulation acts as opportunities for the growth of the market. Military simulation and training is an important technology used for providing training services for system use and maintenance and for military warfare techniques. The military simulation and training is a time effective and cost saving approach, specifically used by the defense sector. Under the defense sector it is used as an effective method to train workforce for higher responsibilities, facilitating personnel with new techniques and procedures, to develop and measure new tactics as well as to estimate the effectiveness of new weapons systems. Based on the training type, Gaming Simulation segment has lucrative market share during the forecast period. Due to the increasing demand for gaming simulation for training, tactics analysis, and mission preparation. Gaming simulation is an important tool to impart training to war fighters by recreating battlefield. By geography, Asia Pacific region is driven by increasing defense budgets of major economies (China, India, South Korea, and Australia) in the region, and rising R&D expenditure for military simulation and training. Some of the key players in Military Simulation and Training market include CAE Inc., Thales Group, Northrop Grumman Corporation, The Raytheon Company, SAAB AB, Lockheed Martin Corporation, Meggitt PLC, Cubic Corporation, L-3 Communications Holdings, Inc., Rockwell Collins, Inc., and Rheinmetall AG. Types Covered: ? Liquid Type ? Drying Type Training Types Covered: ? Constructive ? Live ? Gaming Simulation ? Virtual Applications Covered: ? Ground ? Airborne ? Naval Regions Covered: ? North America o US o Canada o Mexico ? Europe o Germany o UK o Italy o France o Spain o Rest of Europe ? Asia Pacific o Japan o China o India o Australia o New Zealand o South Korea o Rest of Asia Pacific ? South America o Argentina o Brazil o Chile o Rest of South America ? Middle East & Africa o Saudi Arabia o UAE o Qatar o South Africa o Rest of Middle East & Africa What our report offers: - Market share assessments for the regional and country level segments - Strategic recommendations for the new entrants - Market forecasts for a minimum of 9 years of all the mentioned segments, sub segments and the regional markets - Market Trends (Drivers, Constraints, Opportunities, Threats, Challenges, Investment Opportunities, and recommendations) - Strategic analysis: Drivers and Constraints, Product/Technology Analysis, Porter?s five forces analysis, SWOT analysis etc. - Strategic recommendations in key business segments based on the market estimations - Competitive landscaping mapping the key common trends - Company profiling with detailed strategies, financials, and recent developments - Supply chain trends mapping the latest technological advancements Free Customization Offerings: All the customers of this report will be entitled to receive one of the following free customization options: ? Company Profiling o Comprehensive profiling of additional market players (up to 3) o SWOT Analysis of key players (up to 3) ? Regional Segmentation o Market estimations, Forecasts and CAGR of any prominent country as per the clients interest (Note: Depends of feasibility check) ? Competitive Benchmarking o Benchmarking of key players based on product portfolio, geographical presence, and strategic alliances ...

  • Id : RNR-760582
  • Category : Defence Aeronautics
  • Publisher : Stratistics MRC
  • Pages : 162

According to Stratistics MRC, the Global Propulsion Systems market accounted for $261.00 billion in 2017 and is expected to reach $543.80 billion by 2026 growing at a CAGR of 8.5% during the forecast period. Growing space expeditions, increasing applications in various defense weapons and increasing need for long-range missiles are some of the key driving factors for the market growth. However, stringent airspace regulations may hinder market growth. A propulsion system is referred to a system of machines that produces thrust to push an object forward. Propulsion systems work on Newton?s third law, i.e. ?for every action there is an equal and opposite reaction?. Different propulsion systems generate different thrusts, but all thrusts will have some connection with Newton?s third law. On airplanes, thrust is usually generated through some application of Newton's third law of action and reaction. Based on Application, Unmanned Aerial Vehicles segment held considerable market share during the forecast period due to the rising demand for UAV usage in diverse applications. UAVs are mounted with different types of engines in accordance with the required power to perform different operations. By geography, North America is expected to grow at a faster rate due to the rising number of military modernization programs in this region. Some of the key players profiled in the Propulsion Systems include 3W International GmbH, Aerojet Rocketdyne Holdings, Inc. , Financial Highlights, General Electric Co., GKN Aerospace, Honeywell International Inc., Lockheed Martin Corporation, Northrop Grumman Corporation, Orbital ATK, Rolls-Royce Holdings PLC., Safran S.A, The Raytheon Company and United Technologies Corporation. Types Covered: ? Transcatheter Heart Valves ? Tissue Heart Valves ? Tactical Unmanned Aerial Vehicle ? Mini and Micro Unmanned Aerial Vehicle ? Medium-Altitude Long-Endurance Unmanned Aerial Vehicle ? Mechanical Heart Valves ? High-Altitude Long Endurance Unmanned Aerial Vehicle ? Electric Propulsion Engines ? Non-Air Breathing Engines ? Air-Breathing Engines Applications Covered: ? Unmanned Aerial Vehicles ? Spacecraft ? Missiles ? Aircraft ? Railway ? Marine ? Electric Regions Covered: ? North America o US o Canada o Mexico ? Europe o Germany o UK o Italy o France o Spain o Rest of Europe ? Asia Pacific o Japan o China o India o Australia o New Zealand o South Korea o Rest of Asia Pacific ? South America o Argentina o Brazil o Chile o Rest of South America ? Middle East & Africa o Saudi Arabia o UAE o Qatar o South Africa o Rest of Middle East & Africa What our report offers: - Market share assessments for the regional and country level segments - Market share analysis of the top industry players - Strategic recommendations for the new entrants - Market forecasts for a minimum of 9 years of all the mentioned segments, sub-segments, and the regional markets - Market Trends (Drivers, Constraints, Opportunities, Threats, Challenges, Investment Opportunities, and recommendations) - Strategic recommendations in key business segments based on the market estimations - Competitive landscaping mapping the key common trends - Company profiling with detailed strategies, financials, and recent developments - Supply chain trends mapping the latest technological advancements Free Customization Offerings: All the customers of this report will be entitled to receive one of the following free customization options: ? Company Profiling o Comprehensive profiling of additional market players (up to 3) o SWOT Analysis of key players (up to 3) ? Regional Segmentation o Market estimations, Forecasts and CAGR of any prominent country as per the client's interest (Note: Depends on feasibility check) ? Competitive Benchmarking o Benchmarking of key players based on product portfolio, geographical presence, and strategic alliances ...

  • Id : RNR-760575
  • Category : Defence Aeronautics
  • Publisher : Stratistics MRC
  • Pages : 168

According to Stratistics MRC, the Global Weather Forecasting Services market is accounted for $1.22 billion in 2017 and is expected to reach $2.68 billion by 2026 growing at a CAGR of 9.1% during the forecast period. Growing security concern with end-use industry, enlarge in air travel, expansion of transport manufacturing, and improbability in rainfall are some of the key factors which are driving the market growth. However, the insecurity in the forecasting method and difficulty of climate forecasting model which is restraining the market growth. Weather forecasting is the mixture of technology and science to estimate environmental and atmospheric state in an exact region. It is the procedure of meeting statically information of the environment in an exact region and additional process this data throughout different methodical technique in order to predict the atmospheric change. Weather forecasting is a type of consult provision which provides instantaneous forecast and facilitates well-organized routine preparation and sophisticated decision making in a variety of manufacturing operation. Based on End User, the renewable energy segment is likely to guide the weather forecasting services market throughout the forecast period. Government is deploying renewable energy efficiently to increment energy desires of countries, thus dropping the production of greenhouse gas and producing fresh energy. Growth in energy consumption and energy needs for household use and every nation across the globe are facing numerous challenges in meeting the enhanced energy demand. By Geography, Asia Pacific holds the major market share in the worldwide weather forecasting services market owing to enlargement in the shipping trade. Other factors such as addiction to rain in the Asia Pacific might generate a high demand for weather forecasting services. Some of the key players profiled in the Weather Forecasting Services Market include The Weather Company, Stormgeo, Skyview Systems Ltd, Skymet Weather Services Pvt. Ltd., Precision Weather Service, Meteo-Logic, The Met Office, Global Weather Corporation, Fugro N.V., Enav S.P.A, BMT Group Ltd, and Accuweather, Inc. Forecasting Types Covered: ? Long-Range Forecasting ? Medium-Range Forecasting ? Short-Range Forecasting Purposes Covered: ? Safety ? Operational Efficiency ? Other Purposes End Users Covered: ? Transportation & Logistics ? Retail ? Renewable Energy ? Public Service ? Oil & Gas ? Media ? Marine ? Manufacturing ? Individuals ? Energy & Utilities ? Construction ? Banking, Financial Services and Insurance (BFSI) ? Aviation ? Agriculture & Fisheries ? Other End Users Regions Covered: ? North America o US o Canada o Mexico ? Europe o Germany o UK o Italy o France o Spain o Rest of Europe ? Asia Pacific o Japan o China o India o Australia o New Zealand o South Korea o Rest of Asia Pacific ? South America o Argentina o Brazil o Chile o Rest of South America ? Middle East & Africa o Saudi Arabia o UAE o Qatar o South Africa o Rest of Middle East & Africa What our report offers: - Market share assessments for the regional and country level segments - Market share analysis of the top industry players - Strategic recommendations for the new entrants - Market forecasts for a minimum of 9 years of all the mentioned segments, sub-segments, and the regional markets - Market Trends (Drivers, Constraints, Opportunities, Threats, Challenges, Investment Opportunities, and recommendations) - Strategic recommendations in key business segments based on the market estimations - Competitive landscaping mapping the key common trends - Company profiling with detailed strategies, financials, and recent developments - Supply chain trends mapping the latest technological advancements Free Customization Offerings: All the customers of this report will be entitled to receive one of the following free customization options: ? Company Profiling o Comprehensive profiling of additional market players (up to 3) o SWOT Analysis of key players (up to 3) ? Regional Segmentation o Market estimations, Forecasts and CAGR of any prominent country as per the clients interest (Note: Depends of feasibility check) ? Competitive Benchmarking Benchmarking of key players based on product portfolio, geographical presence, and strategic alliances ...

  • Id : RNR-760568
  • Category : Defence Aeronautics
  • Publisher : Stratistics MRC
  • Pages : 182

According to Stratistics MRC, the Global Radar Systems Market is accounted for $19.25 billion in 2017 and is expected to reach $36.78 billion by 2026 growing at a CAGR of 7.5% during the forecast period. Some of the key factors influencing the market growth include Increased use of radars for unmanned vehicles, improved capabilities of radar systems resulting in greater efficiency and increased R&D investments by automotive industry to improve the safety and comfort aspects in vehicles. However, high cost incurred in the development of radar systems is restraining the market growth. Radar systems are used for detecting and tracking physical objects using radio waves to determine the range, angle, and velocity of objects. Radars are used in various applications in the civil, commercial, and military domain, which includes detecting ships, aircraft, spacecraft, missiles, weather information, and terrain. Based on technology, the pulsed rada9r segment has significant growth during the forecast period. This growth can be attributed to the increased usage of pulse radars for efficient and accurate object detection and estimation of its range. By Geography, The Asia-Pacific radar systems market is expected to grow at the considerable market share during the forecast period, due to disputes and unrest in some countries in the region, which has led to the increased procurement of surveillance systems. Countries such as China, India, and Japan have invested significantly in coastal surveillance and weather detection capabilities. Some of the key players in global radar systems market are Honeywell International Inc., Infineon Technologies AG, NXP Semiconductors N.V., Lockheed Martin Corporation, General Dynamics Corporation, BAE Systems, Inc., Rockwell Collins, Inc., Leonardo S.p.A., Thales Group, Saab AB, Israel Aerospace Industries Ltd., Airbus Defense and Space, Inc., Raytheon Corporation, Northrop Grumman Corporation and Weibel Scientific A/S. Components Covered: ? Transmitter ? Receiver ? Antenna ? Other Components Technologies Covered: ? Continuous Wave (CW) Radar ? Pulsed Radar Unmanned Aerial Vehicle Radars Covered: ? Maritime Patrol Radar ? Synthetic Aperture Radar Ranges Covered: ? Long Range Radars ? Short Range Radars ? Medium Range Radars Frequency Bands Covered: ? L Band ? K/Ku/Ka Band ? C Band ? Millimetric Band ? V/UHF Band ? S Band ? HF Band ? X Band ? W Band ? Other Frequency Bands Applications Covered: ? Commercial ? Defense ? Other Applications End-user Industries Covered: ? Automotive ? Aviation ? Military & Defense ? Maritime Applications Regions Covered: ? North America o US o Canada o Mexico ? Europe o Germany o UK o Italy o France o Spain o Rest of Europe ? Asia Pacific o Japan o China o India o Australia o New Zealand o South Korea o Rest of Asia Pacific ? South America o Argentina o Brazil o Chile o Rest of South America ? Middle East & Africa o Saudi Arabia o UAE o Qatar o South Africa o Rest of Middle East & Africa What our report offers: - Market share assessments for the regional and country level segments - Strategic recommendations for the new entrants - Market forecasts for a minimum of 9 years of all the mentioned segments, sub segments and the regional markets - Market Trends (Drivers, Constraints, Opportunities, Threats, Challenges, Investment Opportunities, and recommendations) - Strategic analysis: Drivers and Constraints, Product/Technology Analysis, Porter?s five forces analysis, SWOT analysis etc. - Strategic recommendations in key business segments based on the market estimations - Competitive landscaping mapping the key common trends - Company profiling with detailed strategies, financials, and recent developments - Supply chain trends mapping the latest technological advancements Free Customization Offerings: All the customers of this report will be entitled to receive one of the following free customization options: ? Company Profiling o Comprehensive profiling of additional market players (up to 3) o SWOT Analysis of key players (up to 3) ? Regional Segmentation o Market estimations, Forecasts and CAGR of any prominent country as per the clients interest (Note: Depends of feasibility check) ? Competitive Benchmarking o Benchmarking of key players based on product portfolio, geographical presence, and strategic alliances ...

  • Id : RNR-760553
  • Category : Defence Aeronautics
  • Publisher : Stratistics MRC
  • Pages : 173

According to Stratistics MRC, the Global Coastal Surveillance market accounted for $30.62 billion in 2017 and is expected to reach $48.73 billion by 2026 growing at a CAGR of 5.3% during the forecast period. Growing demand for cloud-based security solutions, increase in the frequency and sophistication of cyber frauds and attacks and emergence of big data analytics are some key factors boosting the market growth. However, lack of skilled professionals is restricting the market growth. Coastal surveillance act as a ?virtual fence? that is recognition, identification, tracking and destruction of the intruders. Coastal surveillance systems are also coupled with geographic information systems to provide the efficient management and operation of automated container placement for security purposes. By End-User, Naval held significant growth during the forecast period due to several advantages such as availability of wider tracking areas, less interruption, and easier coordination. Based on geography, Asia pacific commanded the largest market share due to availability of well-developed Coastal Surveillance systems due to transportation from different countries. Some of the key players profiled in the Coastal Surveillance include Northrop Grumman Corporation, The Raytheon Company, Thales Group, Lockheed Martin Corporation, Kongsberg Gruppen, Frequentis AG, Vissim as, Saab AB, Selex Es S.P.A, Elbit Systems Ltd., Signalis S.A.S, Indra Sistemas, S.A., Controp Precision Technologies Ltd. , Rolta India, Kelvin Hughes and Tokyo Keiki Inc. Structures Covered: ? National ? Regional ? Port Scales Covered: ? Moderate-Scale Surveillance ? Large-Scale Surveillance Applications Covered: ? Command & Control ? Computers ? Surveillance & Reconnaissance ? Communication ? Intelligence ? Electronic Warfare End Users Covered: ? Navy ? Coast Guard ? Other End Users Regions Covered: ? North America o US o Canada o Mexico ? Europe o Germany o UK o Italy o France o Spain o Rest of Europe ? Asia Pacific o Japan o China o India o Australia o New Zealand o South Korea o Rest of Asia Pacific ? South America o Argentina o Brazil o Chile o Rest of South America ? Middle East & Africa o Saudi Arabia o UAE o Qatar o South Africa o Rest of Middle East & Africa What our report offers: - Market share assessments for the regional and country level segments - Market share analysis of the top industry players - Strategic recommendations for the new entrants - Market forecasts for a minimum of 9 years of all the mentioned segments, sub segments and the regional markets - Market Trends (Drivers, Constraints, Opportunities, Threats, Challenges, Investment Opportunities, and recommendations) - Strategic recommendations in key business segments based on the market estimations - Competitive landscaping mapping the key common trends - Company profiling with detailed strategies, financials, and recent developments - Supply chain trends mapping the latest technological advancements ...

  • Id : RNR-760539
  • Category : Defence Aeronautics
  • Publisher : Stratistics MRC
  • Pages : 155

According to Stratistics MRC, the Global More Electric Aircraft Market is accounted for $7.10 billion in 2017 and is expected to reach $14.43 billion by 2026 growing at a CAGR of 8.2%. Optimized aircraft performance, reduced operating & maintenance cost and increase in aircraft deliveries are some of the factors propelling the growth of the market. However, a high amount of investment and longer clearance period likely to hamper the profit boundaries. More Electric Aircraft (MEA) provides for the utilization of electric power for all non-propulsive systems. Traditionally these non-propulsive systems are driven by a combination of different secondary power sources such as hydraulic, pneumatic, mechanical and electrical. Adoption of the MEA concept is seen as a significant enabler for the aircraft industry to unlock major improvements in terms of aircraft weight, fuel consumption, total life-cycle costs, maintainability and aircraft reliability. Based on the platform, the Unmanned Aerial Vehicles (UAV) segment is accounted for the largest growth in the forecast period. UAV is an aircraft without a human pilot on board. They can be controlled by onboard electronic equipments or via control equipment from the ground. When it is remotely controlled from ground it is called RPV (Remotely Piloted Vehicle) and requires reliable wireless communication for control. By geography, North America witness significant growth in the more electric aircraft market size owing to the increasing defense expenditure across the region. Some of the key players in the More Electric Aircraft market include Rolls Royce, Honeywell International, Inc., Thales Group, Lockheed Martin, Zodiac Aerospace SA, Safran Sa, United Technologies Corporation, Airbus, Raytheon Company and Bombardier Inc. Platforms Covered: ? Commercial ? Defense ? Fixed Wing ? Rotary Wing ? Unmanned Aerial Vehicles (UAV) Technologies Covered: ? Safety Systems and Advanced Material ? Power Electronics ? Energy Storage Devices ? Thermal Management Systems Applications Covered: ? Air Pressurization & Conditioning ? Commercial ? Configuration Management ? Flight Controls & Operations ? Military ? Passenger Comfort ? Power Distribution ? Power Generation Management Regions Covered: ? North America o US o Canada o Mexico ? Europe o Germany o UK o Italy o France o Spain o Rest of Europe ? Asia Pacific o Japan o China o India o Australia o New Zealand o South Korea o Rest of Asia Pacific ? South America o Argentina o Brazil o Chile o Rest of South America ? Middle East & Africa o Saudi Arabia o UAE o Qatar o South Africa o Rest of Middle East & Africa What our report offers: - Market share assessments for the regional and country level segments - Strategic recommendations for the new entrants - Market forecasts for a minimum of 9 years of all the mentioned segments, sub segments and the regional markets - Market Trends (Drivers, Constraints, Opportunities, Threats, Challenges, Investment Opportunities, and recommendations) - Strategic analysis: Drivers and Constraints, Product/Technology Analysis, Porter?s five forces analysis, SWOT analysis etc. - Strategic recommendations in key business segments based on the market estimations - Competitive landscaping mapping the key common trends - Company profiling with detailed strategies, financials, and recent developments - Supply chain trends mapping the latest technological advancements Free Customization Offerings: All the customers of this report will be entitled to receive one of the following free customization options: ? Company Profiling o Comprehensive profiling of additional market players (up to 3) o SWOT Analysis of key players (up to 3) ? Regional Segmentation o Market estimations, Forecasts and CAGR of any prominent country as per the clients interest (Note: Depends of feasibility check) ? Competitive Benchmarking Benchmarking of key players based on product portfolio, geographical presence, and strategic alliances. ...

  • Id : RNR-760531
  • Category : Defence Aeronautics
  • Publisher : Stratistics MRC
  • Pages : 182

According to Stratistics MRC, the Global Aircraft Soft Goods Market is accounted for $399 million in 2017 and is expected to reach $625 million by 2026 growing at a CAGR of 5.1% during the forecast period. Some of the key factors influencing the market growth include increasing adoption of interior development methods and the need to enhance the passenger comfort levels in airplanes. However, High cost is hindering the market growth. Based on the material type, Wool/Nylon blend fabric segment is projected to witness a strong growth owing to the superior material properties including water and wrinkle resistance, insulation, and durability. Nylon fabrics are blended with materials such as polyester to enhance elasticity and comfort. Their usage can be attributed to water wicking and quick-drying characteristics. By Geography, North America is expected to grow at a significant market share during the forecast period. The growth can be attributed to wide presence of airplane manufacturers in the region. Increasing the production capacity of well-established aircraft OE including Bombardier and Boeing will fuel the industry growth over the forecast period. Some of the key players in global aircraft soft goods market are Hong Kong Aircraft Engineering(HAECO), Desso Group, InTech Aerospace, Aero Floor, The Anker Company, Aircraft Interior Products, Mohawk Group, E-Leather Ltd., Aero Foams, Tapis Corporation, Botany Weaving Mill Ltd., Lantal Textile AG, RAMM Aerospace and Spectra Interior Products. Product Types Covered: ? Seat Covers ? Curtains ? Carpets ? Other Product Types Aircraft Types Covered: ? Helicopter ? Regional Aircraft ? Commercial Aircraft ? Military Aircraft ? General Aviation ? Business Jet Material Types Covered: ? Nylon Yarn ? Synthetic Leather ? Wool/Nylon Blend Fabric ? Natural Leather ? Polyester Fabric ? Other Materials Distribution Channels Covered: ? Aftermarket ? Original Equipment Manufacturer (OEM) Regions Covered: ? North America o US o Canada o Mexico ? Europe o Germany o UK o Italy o France o Spain o Rest of Europe ? Asia Pacific o Japan o China o India o Australia o New Zealand o South Korea o Rest of Asia Pacific ? South America o Argentina o Brazil o Chile o Rest of South America ? Middle East & Africa o Saudi Arabia o UAE o Qatar o South Africa o Rest of Middle East & Africa What our report offers: - Market share assessments for the regional and country level segments - Market share analysis of the top industry players - Strategic recommendations for the new entrants - Market forecasts for a minimum of 9 years of all the mentioned segments, sub segments and the regional markets - Market Trends (Drivers, Constraints, Opportunities, Threats, Challenges, Investment Opportunities, and recommendations) - Strategic recommendations in key business segments based on the market estimations - Competitive landscaping mapping the key common trends - Company profiling with detailed strategies, financials, and recent developments - Supply chain trends mapping the latest technological advancements Free Customization Offerings: All the customers of this report will be entitled to receive one of the following free customization options: ? Company Profiling o Comprehensive profiling of additional market players (up to 3) o SWOT Analysis of key players (up to 3) ? Regional Segmentation o Market estimations, Forecasts and CAGR of any prominent country as per the clients interest (Note: Depends of feasibility check) ? Competitive Benchmarking o Benchmarking of key players based on product portfolio, geographical presence, and strategic alliances ...

  • Id : RNR-760515
  • Category : Defence Aeronautics
  • Publisher : Stratistics MRC
  • Pages : 156

According to Stratistics MRC, the Global Aircraft Thrust Reverser Market is accounted for $1.29 billion in 2017 and is expected to reach $2.78 billion by 2026 growing at a CAGR of 8.9% during the forecast period. Some of the key factors influencing the market growth include rising safety regulations along with growth in commercial aircraft, growing demand for lightweight thrust reverser and increased demand for fuel-efficient aircraft. However, complexity in the design along with higher cost required for the manufacturing the product are restraining the market growth. Based on the manufacturing process, Resin infusion has significant growth during the forecast timeframe due to superior finish achieved for the product. It eliminates the post fabrication work and produces thick shaped components required for the airplane. By Geography, the Asia Pacific led by China, Japan, South Korea and Australia is poised to grow at the significant market share during the forecast period. Lower fares, increased flight frequency along with the rising preference of air travel are the prime factors driving the industry growth in the region. Some of the key players in global aircraft thrust reverser market are Spirit Aerosystems, Inc., The Nordam Group, Inc., FACC Cooperation, Triumph Group, Inc., Bombardier, UTC Aerospace Systems, Composites Technology Research Malaysia Sdn. Bhd., Woodward, Inc., Leonardo S.p.A, Honeywell International Inc., GKN Aerospace, Parker Hannifin Corp, Safran S.A., Arkwin Industries, Inc. Manufacturing Processes Covered: ? Automated Tape Laying (ATL)/Automated Fiber Placement (AFP) ? Hand Layup ? Resin Infusion ? Other Manufacturing Processes Products Covered: ? Bucket ? Pivot Door ? Cascade Mechanisms Covered: ? Electric ? Hydraulic Material Types Covered: ? Metal-Based ? Composite-Based Aircrafts Covered: ? Small Widebody ? Medium Widebody ? Large Widebody ? Regional Jets ? Single Aisle ? Very Large ? Business Jet Applications Covered: ? Military Aircraft ? Commercial Aircraft ? Civil Aircraft Regions Covered: ? North America o US o Canada o Mexico ? Europe o Germany o UK o Italy o France o Spain o Rest of Europe ? Asia Pacific o Japan o China o India o Australia o New Zealand o South Korea o Rest of Asia Pacific ? South America o Argentina o Brazil o Chile o Rest of South America ? Middle East & Africa o Saudi Arabia o UAE o Qatar o South Africa o Rest of Middle East & Africa What our report offers: - Market share assessments for the regional and country level segments - Market share analysis of the top industry players - Strategic recommendations for the new entrants - Market forecasts for a minimum of 9 years of all the mentioned segments, sub segments and the regional markets - Market Trends (Drivers, Constraints, Opportunities, Threats, Challenges, Investment Opportunities, and recommendations) - Strategic recommendations in key business segments based on the market estimations - Competitive landscaping mapping the key common trends - Company profiling with detailed strategies, financials, and recent developments - Supply chain trends mapping the latest technological advancements Free Customization Offerings: All the customers of this report will be entitled to receive one of the following free customization options: ? Company Profiling o Comprehensive profiling of additional market players (up to 3) o SWOT Analysis of key players (up to 3) ? Regional Segmentation o Market estimations, Forecasts and CAGR of any prominent country as per the clients interest (Note: Depends of feasibility check) ? Competitive Benchmarking o Benchmarking of key players based on product portfolio, geographical presence, and strategic alliances ...

  • Id : RNR-760514
  • Category : Defence Aeronautics
  • Publisher : Stratistics MRC
  • Pages : 120

According to Stratistics MRC, the Global Aircraft Evacuation is accounted for $1.62 billion in 2017 and is expected to reach $2.97 billion by 2026 growing at a CAGR of 7.0 % during the forecast period. Increase in demand for new aircraft and periodic inspections, safety drills, inadvertent slide deployments, and emergency landings are the key driving factors for the market growth. Long product lifecycle of evacuation slides and existing backlogs of aircraft deliveries are the factors hampering the market growth. Aircraft evacuation refers to emergency evacuation from an aircraft which may take place on the ground, in water, or mid-flight. There are standard special evacuation equipment and evacuation procedures to ensure safe evacuation from aircraft. Aircraft accidents have instilled the need for new considerations regarding safety of the aircrafts in emergency situations. Standard evacuation procedures and specialized equipment are to be implemented during the evacuation process. Based on distribution channel, the Original Equipment Manufacturer (OEM) leads the aircraft evacuation market size with increasing investments by airliners for upgrading their product portfolio. For instance, EAM Worldwide entered into a strategic partnership with Lufthansa Technik and received the FAA TSO-C69C approval for manufacturing escape slides. Further, proliferating demand for cost-effective aircraft evacuation systems to facilitate low cost carriers are positively influencing the OEMs market share during the forecast period. By geography, North America aircraft evacuation market share is growing at a faster rate during the forecast period. This share is attributed to the presence of multiple aircraft manufacturers such as Boeing, United Technologies, Lockheed Martin, and General Dynamics Corporation. Increasing focus on lightweight evacuation systems and advanced technologies with ability to sense the ground and automatically adjust length are positively influencing the regional demand. Moreover, increasing aircraft production and delays associated with aircraft deliveries and backlogs are positively influencing the market expansion Some of the key players in the aircraft evacuation market are Cobham PLC, Dart Aerospace, EAM Worldwide, GKN Aerospace Services Limited, Martin-Baker, Mustang Survival, NPP Zvezda PAO, Survival Equipment Services Ltd, Switlik Parachute Company Inc, Trelleborg AB, UTC Aerospace Systems and Zodiac Aerospace. Aircraft Types Covered: ? Fixed Wing ? Rotary Wing Equipment Types Covered: ? Ejection Seat ? Emergency Flotation System (EFS) ? Evacuation Raft ? Evacuation Slide ? Life Vest Fits Covered: ? Linefit ? Retrofit Distribution Channels Covered: ? Original Equipment Manufacturer (OEM) ? Aftermarket Number of Lanes Covered: ? Single Lane ? Double Lane Regions Covered: ? North America o US o Canada o Mexico ? Europe o Germany o UK o Italy o France o Spain o Rest of Europe ? Asia Pacific o Japan o China o India o Australia o New Zealand o South Korea o Rest of Asia Pacific ? South America o Argentina o Brazil o Chile o Rest of South America ? Middle East & Africa o Saudi Arabia o UAE o Qatar o South Africa o Rest of Middle East & Africa What our report offers: - Market share assessments for the regional and country level segments - Market share analysis of the top industry players - Strategic recommendations for the new entrants - Market forecasts for a minimum of 9 years of all the mentioned segments, sub segments and the regional markets - Market Trends (Drivers, Constraints, Opportunities, Threats, Challenges, Investment Opportunities, and recommendations) - Strategic recommendations in key business segments based on the market estimations - Competitive landscaping mapping the key common trends - Company profiling with detailed strategies, financials, and recent developments - Supply chain trends mapping the latest technological advancements Free Customization Offerings: All the customers of this report will be entitled to receive one of the following free customization options: ? Company Profiling o Comprehensive profiling of additional market players (up to 3) o SWOT Analysis of key players (up to 3) ? Regional Segmentation o Market estimations, Forecasts and CAGR of any prominent country as per the clients interest (Note: Depends of feasibility check) ? Competitive Benchmarking Benchmarking of key players based on product portfolio, geographical presence, and strategic alliances ...

  • Id : RNR-760511
  • Category : Defence Aeronautics
  • Publisher : Stratistics MRC
  • Pages : 134

According to Stratistics MRC, the Global Satellite Launch Vehicle Market is growing at a CAGR of 4.2% from 2017 to 2026. Growing remote sensing applications is one of the major factor fuelling market growth. However, regulatory norms restricting the knowledge and resources sharing of technologies related to the launch owing to mission-critical applications are restricting the market growth. Satellites are launched into earth?s orbits via launch vehicles. Launch Vehicles are used to carry spacecraft to space. The launch system consists of the launch pad, the launch vehicle, and other infrastructure. Launch vehicles are classified on the basis of the amount of mass carried into the orbit and the number of stages. They use boosters to supply early thrust and reduce the mass of further stages, thus allowing for larger payloads to be carried into the orbit. Based on Orbits, GEO orbit segment accounted for steady growth in satellite launch vehicle market owing to the growing deployment of small size communication satellites. The geostationary orbit is an area in space which allows a satellite to remain in orbit over a single point of the earth's surface. By Geography, Asia Pacific satellite launch vehicle market share will witness substantial growth over the forecast period due to rising focus on interplanetary missions and a high number of follow-on missions scheduled. Some of the key players profiled in the Satellite Launch Vehicle market include ARCA Space, Blue Origin, Boeing Space and Communications, Bristol Spaceplanes, E Prime Aerospace, Eurockot, Indian Space Research Organisation (ISRO), Kelly Space & Technology, Lockheed Martin, Mitsubishi Heavy Industries, Northrop Grumman Corporation, Scaled Composites LLC, SpaceX, and Virgin Galactic. Orbits Covered: ? Sun-Synchronous Orbit (SSO) ? Medium Earth Orbit (MEO) ? Low Earth Orbit (LEO) ? Geosynchronous Orbit (GEO) Number of Payloads Covered: ? Primary only ? 6 to 10 ? 2 to 5 Launch Activity Covered: ? Non-Commercial ? Commercial Applications Covered: ? Research & Development ? Navigation ? Communication ? Scientific ? Meteorology ? Earth observation ? Remote sensing Regions Covered: ? North America o US o Canada o Mexico ? Europe o Germany o UK o Italy o France o Spain o Rest of Europe ? Asia Pacific o Japan o China o India o Australia o New Zealand o South Korea o Rest of Asia Pacific ? South America o Argentina o Brazil o Chile o Rest of South America ? Middle East & Africa o Saudi Arabia o UAE o Qatar o South Africa o Rest of Middle East & Africa What our report offers: - Market share assessments for the regional and country level segments - Market share analysis of the top industry players - Strategic recommendations for the new entrants - Market forecasts for a minimum of 9 years of all the mentioned segments, sub segments and the regional markets - Market Trends (Drivers, Constraints, Opportunities, Threats, Challenges, Investment Opportunities, and recommendations) - Strategic recommendations in key business segments based on the market estimations - Competitive landscaping mapping the key common trends - Company profiling with detailed strategies, financials, and recent developments - Supply chain trends mapping the latest technological advancements Free Customization Offerings: All the customers of this report will be entitled to receive one of the following free customization options: ? Company Profiling o Comprehensive profiling of additional market players (up to 3) o SWOT Analysis of key players (up to 3) ? Regional Segmentation o Market estimations, Forecasts and CAGR of any prominent country as per the clients interest (Note: Depends of feasibility check) ? Competitive Benchmarking o Benchmarking of key players based on product portfolio, geographical presence, and strategic alliances ...

  • Id : RNR-760496
  • Category : Defence Aeronautics
  • Publisher : Stratistics MRC
  • Pages : 129

According to Stratistics MRC, the Global Attitude and Heading Reference System Market is accounted for $513.83 million in 2017 and is expected to reach $957.62 million by 2026 growing at a CAGR of 7.2% during the forecast period. Some of the key factors influencing the market growth include Rise in aircraft deliveries, increasing demand for use in Unmanned Aerial Vehicles, aircrafts and ships and growing importance of precision navigation, sensitivity, and reliability in the general aviation industry. However, decreased defense budgets of several developed nations are restraining market growth. Attitude and Heading Reference Systems (AHRS) are multi-axis sensors which use inertial navigation for calculating the position and velocity of an aircraft, namely heading, altitude and yaw. It also outputs flight dynamics information to flight deck displays, flight controls, weather radar antenna platform and other aircraft systems. Based on the Type, The GPS-aided attitude and heading reference systems segment is expected to witness the significant growth during the forecast period. GPS-aided attitude and heading reference systems not only offer attitude and heading references for vehicles but also help in their navigation. The accuracy of these systems is high and the systems can detect change in velocity and position, without using accelerometers and magnetometers. By Geography, Asia Pacific attitude and heading reference system market share is expected to witness significant gains owing to the increasing demand for helicopters and UAVs. Additionally, the increasing defense and military budgets coupled with stringent government regulations for regulating the flight systems are further expanding the market share over the study timeframe. Some of the key players in global attitude and heading reference system market are Rockwell Collins, Inc., Universal avionics, Safran S.A., Meggitt PLC, Lord Microstrain, Honeywell International, Inc., MEMSic, Inc., Vectornav Technologies, LLC, Northrop Grumman Corporation, Moog, Inc., Ixblue, Inc. and Sparton Navigation and Exploration, LLC. Components Covered: ? Magnetic Sensing Units ? Processor ? Inertial Sensing Unit ? Magnetometer ? Digital Processing Unit ? Other Components Types Covered: ? Air Data Attitude and Heading Reference Systems (ADAHRS) ? Conventional Attitude and Heading Reference Systems (AHRS) ? GPS-Aided Attitude and Heading Reference Systems (GPS AHRS) Platforms Covered: ? Rotary Wing ? Fixed Wing Aircraft End Users Covered: ? Marine Applications ? Civil Aviation ? Unmanned Vehicles ? Military Aviation ? Aerospace Regions Covered: ? North America o US o Canada o Mexico ? Europe o Germany o UK o Italy o France o Spain o Rest of Europe ? Asia Pacific o Japan o China o India o Australia o New Zealand o South Korea o Rest of Asia Pacific ? South America o Argentina o Brazil o Chile o Rest of South America ? Middle East & Africa o Saudi Arabia o UAE o Qatar o South Africa o Rest of Middle East & Africa What our report offers: - Market share assessments for the regional and country level segments - Strategic recommendations for the new entrants - Market forecasts for a minimum of 9 years of all the mentioned segments, sub segments and the regional markets - Market Trends (Drivers, Constraints, Opportunities, Threats, Challenges, Investment Opportunities, and recommendations) - Strategic analysis: Drivers and Constraints, Product/Technology Analysis, Porter?s five forces analysis, SWOT analysis etc. - Strategic recommendations in key business segments based on the market estimations - Competitive landscaping mapping the key common trends - Company profiling with detailed strategies, financials, and recent developments - Supply chain trends mapping the latest technological advancements Free Customization Offerings: All the customers of this report will be entitled to receive one of the following free customization options: ? Company Profiling o Comprehensive profiling of additional market players (up to 3) o SWOT Analysis of key players (up to 3) ? Regional Segmentation o Market estimations, Forecasts and CAGR of any prominent country as per the clients interest (Note: Depends of feasibility check) ? Competitive Benchmarking o Benchmarking of key players based on product portfolio, geographical presence, and strategic alliances ...

  • Id : RNR-760477
  • Category : Defence Aeronautics
  • Publisher : Stratistics MRC
  • Pages : 156

According to Stratistics MRC, the Global Aerospace Maintenance Chemicals Market is accounted for $6.93 billion in 2017 and is expected to reach $8.52 billion by 2026 growing at a CAGR of 2.3% during the forecast period. Increasing air passenger traffic and rising stringency of safety and environmental regulations are some of the factors fueling the market growth. However, high maintenance cost and lack of players and shortage of skilled expertise are hindering the market growth. Aerospace maintenance chemicals are used to maintain the operational efficiency of aircraft. Surrounding temperature and climatic conditions associated with aerospace industry have generated the need for maintenance activities which in turn created the demand for aerospace maintenance chemicals. On the basis of product, Aircraft Cleaning Chemicals has significant market growth owing to increase in air passengers and steady aircraft iterations degrade interiors and need cleaning ensuring cabin hygiene. By geography, North America holds the largest market share during the forecast period due to growing investments in military and defence sector and increasing air fleet will push maintenance operations are some of the factors driving the market growth in this region. Some of the key players profiled in the Aerospace Maintenance Chemicals Market include 3M, The Dow Chemical Company (Dow), Eastman Chemical Company, Florida Chemical, Nexeo Solutions, LLC , McGean-Rohco, Inc., Pexa, Shell, Sil-Mid Limited , Socomore, Aviation Chemical Solutions, Exxon Mobil Corporation and Callington Haven Pty Ltd. Aircrafts Covered: ? Business Aircraft ? Space Aircraft ? Helicopter ? Single Engine Piston ? Commercial Aircraft ? Defense Aircrafts ? Other Aircrafts Natures Covered: ? Inorganic ? Organic Products Covered: ? Aircraft Leather Cleaners ? Specialty Solvents ? Aircraft Wash and Polish ? Aircraft Cleaning Chemicals ? Aviation Paint Removers ? Degreasers ? Aviation Paint Strippers ? Aluminum Brighteners ? Aviation Paint Strippers Applications Covered: ? Maintenance Repair and Overhaul (MRO) ? Aircraft Parts ? Other Applications Regions Covered: ? North America o US o Canada o Mexico ? Europe o Germany o UK o Italy o France o Spain o Rest of Europe ? Asia Pacific o Japan o China o India o Australia o New Zealand o South Korea o Rest of Asia Pacific ? South America o Argentina o Brazil o Chile o Rest of South America ? Middle East & Africa o Saudi Arabia o UAE o Qatar o South Africa o Rest of Middle East & Africa What our report offers: - Market share assessments for the regional and country level segments - Strategic recommendations for the new entrants - Market forecasts for a minimum of 9 years of all the mentioned segments, sub segments and the regional markets - Market Trends (Drivers, Constraints, Opportunities, Threats, Challenges, Investment Opportunities, and recommendations) - Strategic analysis: Drivers and Constraints, Product/Technology Analysis, Porter?s five forces analysis, SWOT analysis etc. - Strategic recommendations in key business segments based on the market estimations - Competitive landscaping mapping the key common trends - Company profiling with detailed strategies, financials, and recent developments - Supply chain trends mapping the latest technological advancements Free Customization Offerings: All the customers of this report will be entitled to receive one of the following free customization options: ? Company Profiling o Comprehensive profiling of additional market players (up to 3) o SWOT Analysis of key players (up to 3) ? Regional Segmentation o Market estimations, Forecasts and CAGR of any prominent country as per the clients interest (Note: Depends of feasibility check) ? Competitive Benchmarking Benchmarking of key players based on product portfolio, geographical presence, and strategic alliances ...

  • Id : RNR-760461
  • Category : Defence Aeronautics
  • Publisher : Stratistics MRC
  • Pages : 158

According to Stratistics MRC, the Global Aerospace Cold Forgings Market is accounted for $3.20 million in 2017 and is expected to reach $6.29 million by 2026 growing at a CAGR of 7.8% during the forecast period. Growing technological advancements in aerospace industry, Increasing aircraft production and stringent regulations associated with the aerospace industry are some of the factors driving the market growth. However, lack of skilled labor and availability of composite materials possessing no-corrosive properties are restraining the market growth. Cold forging is a manufacturing process used to warp materials into high-strength parts. Aerospace parts require better manufacturing accuracy and this is precisely what cold forging process offers. These parts require minimal to no finishing and offer high dimensional accuracy. Based on platform, Fixed Wing segment has witnessed the significant market growth due to the development of military and commercial aviation industry along with growing demand for cost efficient aircraft. By, geography, North America holds the largest market share during the forecast period due to ushering aerospace industry leading to a grow in the production of aircrafts. Moreover, increasing expenses on defense are driving the market growth in this region. Some of the key players profiled in the Aerospace Cold Forgings Market include Arconic, Eramet Group , Scot Forge, Bharat Forge, Precision Castparts Corp, Vsmpo-Avisma and Shaanxi Hongyuan Aviation Forging Co Ltd . Platforms Covered: ? Rotary Wing ? Fixed Wing Product Types Covered: ? Captive Forging ? Catalog Forging ? Custom Forging Applications Covered: ? Nacelle ? Airframe ? Landing Gear Regions Covered: ? North America o US o Canada o Mexico ? Europe o Germany o UK o Italy o France o Spain o Rest of Europe ? Asia Pacific o Japan o China o India o Australia o New Zealand o South Korea o Rest of Asia Pacific ? South America o Argentina o Brazil o Chile o Rest of South America ? Middle East & Africa o Saudi Arabia o UAE o Qatar o South Africa o Rest of Middle East & Africa What our report offers: - Market share assessments for the regional and country level segments - Strategic recommendations for the new entrants - Market forecasts for a minimum of 9 years of all the mentioned segments, sub segments and the regional markets - Market Trends (Drivers, Constraints, Opportunities, Threats, Challenges, Investment Opportunities, and recommendations) - Strategic analysis: Drivers and Constraints, Product/Technology Analysis, Porter?s five forces analysis, SWOT analysis etc. - Strategic recommendations in key business segments based on the market estimations - Competitive landscaping mapping the key common trends - Company profiling with detailed strategies, financials, and recent developments - Supply chain trends mapping the latest technological advancements Free Customization Offerings: All the customers of this report will be entitled to receive one of the following free customization options: ? Company Profiling o Comprehensive profiling of additional market players (up to 3) o SWOT Analysis of key players (up to 3) ? Regional Segmentation o Market estimations, Forecasts and CAGR of any prominent country as per the clients interest (Note: Depends of feasibility check) ? Competitive Benchmarking Benchmarking of key players based on product portfolio, geographical presence, and strategic alliances ...

  • Id : RNR-760460
  • Category : Defence Aeronautics
  • Publisher : Stratistics MRC
  • Pages : 144

According to Stratistics MRC, the Global Aerospace Floor Panels Market is accounted for $168.42 million in 2017 and is expected to reach $292.96 million by 2026 growing at a CAGR of 6.3% from 2017 to 2026. Some of the factors such as increasing military expenditure, increasing air traffic, rising demand for air transportation worldwide are driving the market growth. However, high component and manufacturing costs are hampering market growth. Aerospace floor panels are manufactured using many number of raw materials including aluminum honeycomb, Nomex honeycomb which are used to manufacture the floor panels that can be used in military, commercial, and business aircraft. They are the vital products used in aircraft for flooring purpose. Light weight, high strength, durability, and non-flammable floor panels are key criteria in the manufacture of aerospace floor panels. By End User, Commercial Aircraft acquired significant share during forecast period due to rising air passenger traffic. Commercial aircraft transport passengers and cargo from one location to another. Rise in manufacturing of commercial aircrafts including B737, B787 A350 and A320 family will fuel industry growth. By Geography, Asia Pacific registered significant share during the forecast period attributed to the rising demand for various types of aircraft and increasing retrofit activities in old aircrafts. Some of the key players in this market include Avcorp Industries Inc., Collins Aerospace (B/E Aerospace, Inc.), EnCore Aerospace Group, Euro-Composites S.A., Hexcel Corporation, Honylite, The Gill Corporation, Triumph Group (Triumph Composite Systems), Safran S.A. (Zodiac Aerospace), Rockwell Collins, Inc, Zodiac Aerospace, The Nordam Group, Inc., AIM Aviation Ltd. Raw materials Covered: ? Aluminum honeycomb ? Nomex honeycomb ? Other Raw Materials Distribution channel Covered: ? Original Equipment Manufacturer ? Aftermarket ? Other Distribution Channels Aircraft Type Covered: ? Very Large Aircraft ? Wide-Body Aircraft ? Narrow-Body Aircraft ? General Aviation ? Other Aircrafts End users Covered: ? Commercial aircraft ? Regional Aircraft ? Business jet ? Helicopter ? Military aircraft Regions Covered: ? North America o US o Canada o Mexico ? Europe o Germany o UK o Italy o France o Spain o Rest of Europe ? Asia Pacific o Japan o China o India o Australia o New Zealand o South Korea o Rest of Asia Pacific ? South America o Argentina o Brazil o Chile o Rest of South America ? Middle East & Africa o Saudi Arabia o UAE o Qatar o South Africa o Rest of Middle East & Africa What our report offers: - Market share assessments for the regional and country level segments - Strategic recommendations for the new entrants - Market forecasts for a minimum of 9 years of all the mentioned segments, sub segments and the regional markets - Market Trends (Drivers, Constraints, Opportunities, Threats, Challenges, Investment Opportunities, and recommendations) - Strategic analysis: Drivers and Constraints, Product/Technology Analysis, Porter?s five forces analysis, SWOT analysis etc. - Strategic recommendations in key business segments based on the market estimations - Competitive landscaping mapping the key common trends - Company profiling with detailed strategies, financials, and recent developments - Supply chain trends mapping the latest technological advancements Free Customization Offerings: All the customers of this report will be entitled to receive one of the following free customization options: ? Company Profiling o Comprehensive profiling of additional market players (up to 3) o SWOT Analysis of key players (up to 3) ? Regional Segmentation o Market estimations, Forecasts and CAGR of any prominent country as per the clients interest (Note: Depends of feasibility check) ? Competitive Benchmarking o Benchmarking of key players based on product portfolio, geographical presence, and strategic alliances ...

  • Id : RNR-760445
  • Category : Defence Aeronautics
  • Publisher : Stratistics MRC
  • Pages : 134

According to Stratistics MRC, the Global Aerospace Landing Gear Market is accounted for $10.44 billion in 2017 and is expected to reach $20.01 billion by 2026 growing at a CAGR of 7.5% during the forecast period. Some of the key factors influencing the market growth include increasing aircraft procurement for the military sector and rising air passenger traffic. However, existing failures in aircraft deliveries are restraining market growth. By Platform, Rotary segment is expected to remain attractive during the forecast period owing to growing the demand of helicopters for several military applications such as observation, emergency services, and special purpose combat operations. By Geography, Asia Pacific is expected to grow at the largest market share during the forecast period. The region has emerged of low-cost carriers along with rising affordability and recovering tourism sector will further hold the regional growth over the study timeframe. Some of the key players profiled in the Aerospace Landing Gear Market include Whippany Actuation Systems, United Technologies Corporation, Triumph Group Inc., SPP Canada Aircraft, Inc., Safran S.A., Magellan Aerospace Corporation, Liebherr-International AG, Honeywell Aerospace, H?roux-Devtek Inc., GKN Aerospace Services Ltd., Eaton Corporation, Circor International, Inc., Aerospace Turbine Rotables and AAR Corp. Positions Covered: ? Nose Landing Gear ? Main Landing Gear Platforms Covered: ? Fixed Wing ? Rotary Wing Arrangements Covered: ? Tri-cycle ? Tandem ? Tail Wheel Applications Covered: ? Commercial ? Helicopter ? Miltary Aircraft ? General Aircraft End Users Covered: ? Maintenance, Repair, and Overhaul (MRO) ? Original Equipment Manufacturer (OEM) ? Aftermarket Regions Covered: ? North America o US o Canada o Mexico ? Europe o Germany o UK o Italy o France o Spain o Rest of Europe ? Asia Pacific o Japan o China o India o Australia o New Zealand o South Korea o Rest of Asia Pacific ? South America o Argentina o Brazil o Chile o Rest of South America ? Middle East & Africa o Saudi Arabia o UAE o Qatar o South Africa o Rest of Middle East & Africa What our report offers: - Market share assessments for the regional and country level segments - Market share analysis of the top industry players - Strategic recommendations for the new entrants - Market forecasts for a minimum of 9 years of all the mentioned segments, sub-segments, and the regional markets - Market Trends (Drivers, Constraints, Opportunities, Threats, Challenges, Investment Opportunities, and recommendations) - Strategic recommendations in key business segments based on the market estimations - Competitive landscaping mapping the key common trends - Company profiling with detailed strategies, financials, and recent developments - Supply chain trends mapping the latest technological advancements Free Customization Offerings: All the customers of this report will be entitled to receive one of the following free customization options: ? Company Profiling o Comprehensive profiling of additional market players (up to 3) o SWOT Analysis of key players (up to 3) ? Regional Segmentation o Market estimations, Forecasts and CAGR of any prominent country as per the client's interest (Note: Depends on feasibility check) ? Competitive Benchmarking o Benchmarking of key players based on product portfolio, geographical presence, and strategic alliances ...

  • Id : RNR-760430
  • Category : Defence Aeronautics
  • Publisher : Stratistics MRC
  • Pages : 164

According to Stratistics MRC, the Global Electronically Scanned Arrays is accounted for $6.68 billion in 2017 and is expected to reach $12.39 billion by 2026 growing at a CAGR of 7.1% during the forecast period. The growing preference for technologically advanced radar for providing all weather battlefield surveillance against incoming threat, integration of ESA into radar systems and replacement of traditional ESA systems are the key driving factors for the market growth. However, the long replacement cycle of the radar system and high development cost of ESA are some of the factors hindering the market growth. Electronically scanned array commonly means a phased array, i.e. an array of antennas that produce radio wave beams and rays. Electronically, the emitted waves are steered in the desired direction to a specific point without physically moving the antennas. Electronically scanned arrays must be installed properly and arranged precisely to get appropriate results during real time operations. In an array antenna, the transmitter transmits a radio frequency current, which is then fed to each antenna with the correct phase relationship so as to add radio waves to increase radiations in the exact location and direction, and cancel radiations in undesired directions. In the phased array system, current from the transmitter is transmitted to the antennas through electronic devices called phase shifters, which in turn are controlled by a computer system. This computer system can effectively alter the phase electronically and hence, steer the radio wave beams to the desired location. Based on type, the active electronically scanned arrays (AESA) is predicted to experience the highest growth in terms of revenue during the forecast period. AESAs are fitted with receivers and transmitters, which yet again consist of several small modules of transmitter/receivers. By geography, Asia Pacific region is anticipated to experience the highest growth in the coming eight years. The growing threats of terror activities in the region and is anticipated to drive the need for up gradation of surveillance capabilities. This in turn is predicted to accelerate the demand of electronically scanned arrays in Asia Pacific region. Some of the key players profiled in the Electronically Scanned Arrays include Almaz?Antey, Defence Research And Development Organization , Israel Aerospace Industries Ltd, Leonardo-Finmeccanica, Lockheed Martin Corporation, Northrop Grumman Corporation, RADA Electronic Industries Ltd, Raytheon Company, Reutech Radar Systems, SAAB AB, Thales Group and Toshiba. Platforms Covered: ? Airborne ? Land ? Naval Array Geometries Covered: ? Frequency Scanning Arrays ? Linear Arrays ? Planar Arrays Types Covered: ? Passive Electronically Scanned Array (PESA) ? Active Electronically Scanned Array (AESA) Components Covered: ? Beam forming Network (BFN) ? Cooling System ? Phase Shifters (Analog/Digital) ? Power Supply Module ? Radar Data Processor (RDP) ? Signal Processing (Analog/Digital) ? Transmit Receive Module (TRM) Ranges Covered: ? Long Range ? Medium Range ? Short Range Regions Covered: ? North America o US o Canada o Mexico ? Europe o Germany o UK o Italy o France o Spain o Rest of Europe ? Asia Pacific o Japan o China o India o Australia o New Zealand o South Korea o Rest of Asia Pacific ? South America o Argentina o Brazil o Chile o Rest of South America ? Middle East & Africa o Saudi Arabia o UAE o Qatar o South Africa o Rest of Middle East & Africa What our report offers: - Market share assessments for the regional and country level segments - Strategic recommendations for the new entrants - Market forecasts for a minimum of 9 years of all the mentioned segments, sub segments and the regional markets - Market Trends (Drivers, Constraints, Opportunities, Threats, Challenges, Investment Opportunities, and recommendations) - Strategic analysis: Drivers and Constraints, Product/Technology Analysis, Porter?s five forces analysis, SWOT analysis etc. - Strategic recommendations in key business segments based on the market estimations - Competitive landscaping mapping the key common trends - Company profiling with detailed strategies, financials, and recent developments - Supply chain trends mapping the latest technological advancements Free Customization Offerings: All the customers of this report will be entitled to receive one of the following free customization options: ? Company Profiling o Comprehensive profiling of additional market players (up to 3) o SWOT Analysis of key players (up to 3) ? Regional Segmentation o Market estimations, Forecasts and CAGR of any prominent country as per the clients interest (Note: Depends of feasibility check) ? Competitive Benchmarking Benchmarking of key players based on product portfolio, geographical presence, and strategic alliances ...

  • Id : RNR-722773
  • Category : Defence Aeronautics
  • Publisher : Stratistics MRC
  • Pages : 168

According to Stratistics MRC, the Global Military Simulation and Training Market is accounted for $ 10.74 billion in 2017 and is expected to reach $ 17.57 billion by 2026 growing at a CAGR of 5.6%. Factors such as rising demand for adoption of virtual training for future generation, and reducing the budget of military equipment and training are driving the market growth. However, lack of lack of inducements and challenges for manufacturers of simulators are hampering the growth of the market. Moreover, increase in the innovative technology and R&D activities about the military simulation acts as opportunities for the growth of the market. Military simulation and training is an important technology used for providing training services for system use and maintenance and for military warfare techniques. The military simulation and training is a time effective and cost saving approach, specifically used by the defense sector. Under the defense sector it is used as an effective method to train workforce for higher responsibilities, facilitating personnel with new techniques and procedures, to develop and measure new tactics as well as to estimate the effectiveness of new weapons systems. Based on the training type, Gaming Simulation segment has lucrative market share during the forecast period. Due to the increasing demand for gaming simulation for training, tactics analysis, and mission preparation. Gaming simulation is an important tool to impart training to war fighters by recreating battlefield. By geography, Asia Pacific region is driven by increasing defense budgets of major economies (China, India, South Korea, and Australia) in the region, and rising R&D expenditure for military simulation and training. Some of the key players in Military Simulation and Training market include CAE Inc., Thales Group, Northrop Grumman Corporation, The Raytheon Company, SAAB AB, Lockheed Martin Corporation, Meggitt PLC, Cubic Corporation, L-3 Communications Holdings, Inc., Rockwell Collins, Inc., and Rheinmetall AG. Types Covered: ? Liquid Type ? Drying Type Training Types Covered: ? Constructive ? Live ? Gaming Simulation ? Virtual Applications Covered: ? Ground ? Airborne ? Naval Regions Covered: ? North America o US o Canada o Mexico ? Europe o Germany o UK o Italy o France o Spain o Rest of Europe ? Asia Pacific o Japan o China o India o Australia o New Zealand o South Korea o Rest of Asia Pacific ? South America o Argentina o Brazil o Chile o Rest of South America ? Middle East & Africa o Saudi Arabia o UAE o Qatar o South Africa o Rest of Middle East & Africa What our report offers: - Market share assessments for the regional and country level segments - Strategic recommendations for the new entrants - Market forecasts for a minimum of 9 years of all the mentioned segments, sub segments and the regional markets - Market Trends (Drivers, Constraints, Opportunities, Threats, Challenges, Investment Opportunities, and recommendations) - Strategic analysis: Drivers and Constraints, Product/Technology Analysis, Porter?s five forces analysis, SWOT analysis etc. - Strategic recommendations in key business segments based on the market estimations - Competitive landscaping mapping the key common trends - Company profiling with detailed strategies, financials, and recent developments - Supply chain trends mapping the latest technological advancements Free Customization Offerings: All the customers of this report will be entitled to receive one of the following free customization options: ? Company Profiling o Comprehensive profiling of additional market players (up to 3) o SWOT Analysis of key players (up to 3) ? Regional Segmentation o Market estimations, Forecasts and CAGR of any prominent country as per the clients interest (Note: Depends of feasibility check) ? Competitive Benchmarking o Benchmarking of key players based on product portfolio, geographical presence, and strategic alliances ...

  • Id : RNR-722744
  • Category : Defence Aeronautics
  • Publisher : Stratistics MRC
  • Pages : 162

According to Stratistics MRC, the Global Propulsion Systems market accounted for $261.00 billion in 2017 and is expected to reach $543.80 billion by 2026 growing at a CAGR of 8.5% during the forecast period. Growing space expeditions, increasing applications in various defense weapons and increasing need for long-range missiles are some of the key driving factors for the market growth. However, stringent airspace regulations may hinder market growth. A propulsion system is referred to a system of machines that produces thrust to push an object forward. Propulsion systems work on Newton?s third law, i.e. ?for every action there is an equal and opposite reaction?. Different propulsion systems generate different thrusts, but all thrusts will have some connection with Newton?s third law. On airplanes, thrust is usually generated through some application of Newton's third law of action and reaction. Based on Application, Unmanned Aerial Vehicles segment held considerable market share during the forecast period due to the rising demand for UAV usage in diverse applications. UAVs are mounted with different types of engines in accordance with the required power to perform different operations. By geography, North America is expected to grow at a faster rate due to the rising number of military modernization programs in this region. Some of the key players profiled in the Propulsion Systems include 3W International GmbH, Aerojet Rocketdyne Holdings, Inc. , Financial Highlights, General Electric Co., GKN Aerospace, Honeywell International Inc., Lockheed Martin Corporation, Northrop Grumman Corporation, Orbital ATK, Rolls-Royce Holdings PLC., Safran S.A, The Raytheon Company and United Technologies Corporation. Types Covered: ? Transcatheter Heart Valves ? Tissue Heart Valves ? Tactical Unmanned Aerial Vehicle ? Mini and Micro Unmanned Aerial Vehicle ? Medium-Altitude Long-Endurance Unmanned Aerial Vehicle ? Mechanical Heart Valves ? High-Altitude Long Endurance Unmanned Aerial Vehicle ? Electric Propulsion Engines ? Non-Air Breathing Engines ? Air-Breathing Engines Applications Covered: ? Unmanned Aerial Vehicles ? Spacecraft ? Missiles ? Aircraft ? Railway ? Marine ? Electric Regions Covered: ? North America o US o Canada o Mexico ? Europe o Germany o UK o Italy o France o Spain o Rest of Europe ? Asia Pacific o Japan o China o India o Australia o New Zealand o South Korea o Rest of Asia Pacific ? South America o Argentina o Brazil o Chile o Rest of South America ? Middle East & Africa o Saudi Arabia o UAE o Qatar o South Africa o Rest of Middle East & Africa What our report offers: - Market share assessments for the regional and country level segments - Market share analysis of the top industry players - Strategic recommendations for the new entrants - Market forecasts for a minimum of 9 years of all the mentioned segments, sub-segments, and the regional markets - Market Trends (Drivers, Constraints, Opportunities, Threats, Challenges, Investment Opportunities, and recommendations) - Strategic recommendations in key business segments based on the market estimations - Competitive landscaping mapping the key common trends - Company profiling with detailed strategies, financials, and recent developments - Supply chain trends mapping the latest technological advancements Free Customization Offerings: All the customers of this report will be entitled to receive one of the following free customization options: ? Company Profiling o Comprehensive profiling of additional market players (up to 3) o SWOT Analysis of key players (up to 3) ? Regional Segmentation o Market estimations, Forecasts and CAGR of any prominent country as per the client's interest (Note: Depends on feasibility check) ? Competitive Benchmarking o Benchmarking of key players based on product portfolio, geographical presence, and strategic alliances ...

  • Id : RNR-722737
  • Category : Defence Aeronautics
  • Publisher : Stratistics MRC
  • Pages : 168

According to Stratistics MRC, the Global Weather Forecasting Services market is accounted for $1.22 billion in 2017 and is expected to reach $2.68 billion by 2026 growing at a CAGR of 9.1% during the forecast period. Growing security concern with end-use industry, enlarge in air travel, expansion of transport manufacturing, and improbability in rainfall are some of the key factors which are driving the market growth. However, the insecurity in the forecasting method and difficulty of climate forecasting model which is restraining the market growth. Weather forecasting is the mixture of technology and science to estimate environmental and atmospheric state in an exact region. It is the procedure of meeting statically information of the environment in an exact region and additional process this data throughout different methodical technique in order to predict the atmospheric change. Weather forecasting is a type of consult provision which provides instantaneous forecast and facilitates well-organized routine preparation and sophisticated decision making in a variety of manufacturing operation. Based on End User, the renewable energy segment is likely to guide the weather forecasting services market throughout the forecast period. Government is deploying renewable energy efficiently to increment energy desires of countries, thus dropping the production of greenhouse gas and producing fresh energy. Growth in energy consumption and energy needs for household use and every nation across the globe are facing numerous challenges in meeting the enhanced energy demand. By Geography, Asia Pacific holds the major market share in the worldwide weather forecasting services market owing to enlargement in the shipping trade. Other factors such as addiction to rain in the Asia Pacific might generate a high demand for weather forecasting services. Some of the key players profiled in the Weather Forecasting Services Market include The Weather Company, Stormgeo, Skyview Systems Ltd, Skymet Weather Services Pvt. Ltd., Precision Weather Service, Meteo-Logic, The Met Office, Global Weather Corporation, Fugro N.V., Enav S.P.A, BMT Group Ltd, and Accuweather, Inc. Forecasting Types Covered: ? Long-Range Forecasting ? Medium-Range Forecasting ? Short-Range Forecasting Purposes Covered: ? Safety ? Operational Efficiency ? Other Purposes End Users Covered: ? Transportation & Logistics ? Retail ? Renewable Energy ? Public Service ? Oil & Gas ? Media ? Marine ? Manufacturing ? Individuals ? Energy & Utilities ? Construction ? Banking, Financial Services and Insurance (BFSI) ? Aviation ? Agriculture & Fisheries ? Other End Users Regions Covered: ? North America o US o Canada o Mexico ? Europe o Germany o UK o Italy o France o Spain o Rest of Europe ? Asia Pacific o Japan o China o India o Australia o New Zealand o South Korea o Rest of Asia Pacific ? South America o Argentina o Brazil o Chile o Rest of South America ? Middle East & Africa o Saudi Arabia o UAE o Qatar o South Africa o Rest of Middle East & Africa What our report offers: - Market share assessments for the regional and country level segments - Market share analysis of the top industry players - Strategic recommendations for the new entrants - Market forecasts for a minimum of 9 years of all the mentioned segments, sub-segments, and the regional markets - Market Trends (Drivers, Constraints, Opportunities, Threats, Challenges, Investment Opportunities, and recommendations) - Strategic recommendations in key business segments based on the market estimations - Competitive landscaping mapping the key common trends - Company profiling with detailed strategies, financials, and recent developments - Supply chain trends mapping the latest technological advancements Free Customization Offerings: All the customers of this report will be entitled to receive one of the following free customization options: ? Company Profiling o Comprehensive profiling of additional market players (up to 3) o SWOT Analysis of key players (up to 3) ? Regional Segmentation o Market estimations, Forecasts and CAGR of any prominent country as per the clients interest (Note: Depends of feasibility check) ? Competitive Benchmarking Benchmarking of key players based on product portfolio, geographical presence, and strategic alliances ...

  • Id : RNR-722730
  • Category : Defence Aeronautics
  • Publisher : Stratistics MRC
  • Pages : 182